Request Acoustical Analysis

Professional Acoustic Assessment™

Step 1 of 8

12%

Welcome to Resonance Design™

Professional Acoustic Assessment™

Thank you for choosing Resonance Design.

This Professional Acoustic Assessment is the first step in our engineering process. The information you provide will be used to evaluate your room, identify acoustical issues, and develop practical recommendations to improve its performance.

Please complete each section as accurately as possible. If you do not know the answer to a question, simply leave it blank and continue. Supporting photographs, floor plans, sketches, and equipment lists will significantly improve the quality of the final analysis.

Most assessments require 10–15 minutes to complete. You may save your progress and return later if necessary.

After your submission is received, it will undergo an engineering review before your personalized report is prepared.

When you are ready, click Next.

Client & Project Information

Please provide your contact information and basic project information. This information will be used only for the preparation of your acoustical analysis and any necessary project correspondence. Most projects can be completed with only the information requested here. If additional information is needed, we will contact you before beginning the analysis.

Client Name(Required)

Company

Email(Required)

Phone

Project Location(Required)

Please provide the city, state or province (if applicable), and country where this project is located. A street address is not required.

Room Dimensions & Basic Geometry

Accurate room dimensions are essential for a precise acoustic analysis. Please measure the finished interior surfaces of the room. Measurements within 1 inch (25 mm) are preferred.

Primary Room Use(Required)

Measurement System (Imperial or Metric)(Required)

Imperial (Feet / Inches)

Metric (Meters / Centimeters)

Please measure finished interior dimensions. Measurements within 1 inch (25 mm) are preferred for the most accurate acoustic analysis.

Room Length(Required)

Example: 18′ 6½” or 5 m 65 cm

Room Width(Required)

Example: 18′ 6½” or 5 m 65 cm

Room Height(Required)

Example: 18′ 6½” or 5 m 65 cm

Ceiling Shape(Required)

Select the ceiling shape that most closely matches your room.

Ceiling Details

If the ceiling is sloped, vaulted, cathedral, tray, coffered, curved, or otherwise non-flat, briefly describe it here. Include any changes in height, beams, soffits, or unusual features. Mention any skylights, exposed structural members, or other architectural features that may affect acoustics.

Additional Room Geometry Notes

Include anything unusual about the room that is not shown elsewhere, such as alcoves, columns, soffits, open stairways, half walls, or other architectural features.

Loudspeakers & Listening Position

This section identifies your loudspeaker system, listening position, and seating layout. These details are essential for evaluating room modes, speaker/listener interaction, SBIR effects, and optimization recommendations.

1. Audio System Type

Select the speaker configuration that most closely matches your system.

2. Primary Listening Position(Required)

Describe the primary listening position (for example: center seat of the front row).

3. Number of Seating Rows

4. Is the rear seating on a raised platform?

Yes

N/A

5. Number of Subwoofers

Approximate loudspeaker and subwoofer locations are important for predicting room interactions and developing placement recommendations. Exact measurements are not required if you are unsure.

1. Front Left & Right Speaker Locations

Describe the approximate location of your front left and right speakers. For example: “About 2 feet from the front wall and 18 inches from each side wall.”

2. Center Speaker Location

Describe the location of the center speaker. Indicate whether it is above, below, or behind the screen.

3. Surround Speaker Locations

Describe the approximate locations of your surround and rear speakers.

4. Height / Atmos Speaker Locations

Describe the locations of any ceiling-mounted or height speakers.

5. Subwoofer Locations

Describe the approximate location of each subwoofer (for example: front left corner, midpoint of right wall, behind seating, etc.).

6. Speaker Placement Notes

Include any additional information about your speaker placement, mounting, or installation that may affect the analysis.

Floor Finish

Wall Finish

Painted Drywall

Fabric covered acoustical walls

Wood paneling

Brick

Concrete

Glass

Other

Ceiling Finish

Existing Acoustic Treatments

None

Bass traps

Wall absorption

Ceiling clouds

Diffusers

Fabric wall system

Heavy Draperies

Carpet

Other

Windows

Doors

Openings

Describe openings into adjacent rooms.

Upload Project Files

Drop files here or

Accepted file types: pdf, jpg, jpeg, png, Max. file size: 512 MB.

Upload any photos, floor plans, elevations, or room sketches. If available, you may include speaker layouts, equipment drawings, or any other documents that may help us to evaluate your room. You may upload multiple files.

Additional Notes, Descriptions, or Explanations

Tell us anything else you might want us to know about the room, it’s structure, it’s use(s), or anything you didn’t think fit our field explanations.

Whether this is a new room or an existing one, please tell us what you hope to accomplish. If the room already exists, you may also describe any acoustic problems you would like us to address.

Better bass

Better dialogue

Improve speech intelligibility

More immersive sound

Reduce flutter echo

General improvement

Please select all that apply.

Custom Home Theater & Listening Room Design – We Make Sound Beautiful

Professional Acoustic Assessment™

Welcome to Resonance Design™

Client & Project Information

Room Dimensions & Basic Geometry

Loudspeakers & Listening Position